Number of items: 65.
2011
Ahmad Yusairi, B.H., and Noor Azuan, A.O., and Wan Abu Bakar, W.A., (2011) Plain design of foot-ankle mechanism by prediction of the ground reaction force intensity on active bones. Journal of Advanced Manufacturing Technology, 5 (1). pp. 29-34. ISSN 1985-3157
Dan, M.M.P., and Zarith, S.M., and Saifudin, H.Y., (2011) Waste Rubber Tyre As Road Divider Application. Journal of Advanced Manufacturing Technology, 5 (1). pp. 87-96. ISSN 1985-3157
Gil, Paulo J.S., and Ferreira, Ivo M.L., (2011) Complex systems design issues leveraging interaction visualization and knowledge management in a concurrent environment. Journal of Advanced Manufacturing Technology, 5 (1). pp. 1-19. ISSN 1985-3157
Hambali, A., and Sapuan, S.M., and Mohamad, M., (2011) Concurrent decisions using analytical hierarchy process at the conceptual design stage. Journal of Advanced Manufacturing Technology, 5 (1). pp. 79-86. ISSN 1985-3157
Rahman, M.A., and Adi, S., and Hambali, A., (2011) Influence of week, shift and working hours in determining the automative manufacturing productivity. Journal of Advanced Manufacturing Technology, 5 (1). pp. 35-44. ISSN 1985-3157
Shalahuddin, L., and Fajar, R., and Sumartono, H., and Nugroho, R.C., (2011) Prediction of combustion characteristics and emission of a diesel engine fuelled with biodiesel using computational fluids dynamic CFD). SIMULATION. Journal of Advanced Manufacturing Technology, 5 (1). pp. 21-28. ISSN 1985-3157
Yusoff, A.R., and Sims, N.D., (2011) Determination of optimal variable helix and variable pitch tool geometry for chatter suppression in milling process. Journal of Advanced Manufacturing Technology, Vol. 5 (No. 1). pp. 45-60. ISSN 1985-3157
Zairul, M.M.M., and Rahinah, I., (2011) Identifying concurrent engineering (CE) elements for mass housing industry. Journal of Advanced Manufacturing Technology, 5 (1). pp. 61-78. ISSN 1985-3157
2010
Bulan A., and Ahmed J., and Khadijah S., and Shabuddin W., and Abdullah R., and Fazrul A.F., (2010) Tke effect on microstructure and mechanical properties of titanium 0.5% alloyed heat treated ductile iron. Journal of Advanced Manufacturing Technology, 4 (2). pp. 91-100. ISSN 1985-3157
Dalle, J., (2010) A Study of early perception of new student placement (NSP) system. Journal of Advanced Manufacturing Technology, Vol. 4 (No. 2). pp. 49-58. ISSN 1985-3157
Dan M.M.P., and Huda M.M.K., and Saifudin H.Y., (2010) Rapid prototyping of hard armor plate from scanned measurement data. Journal of Advanced Manufacturing Technology, 4 (2). pp. 59-70. ISSN 1985-3157
Faizal M.A., and Zaki M.M., and Shahrin S., and Robiah Y, and Rahayu S.S., (2010) Statistical Approach for Validating Static Threshold in Fast Attack Detection. Journal of Advanced Manufacturing Technology, 4 (1). pp. 53-72. ISSN 1985-3157
Faizal M.A., and Zaki M.M., and Shahrin S., and Robiah Y., and Rahayu S.S., (2010) Statistical Approach for Validating Static Threshold in Fast Attack Detection. Journal of Advanced Manufacturing Technology, 4 (1). pp. 53-72. ISSN 1985-3157
Hambali A, and Sapuan S.M., (2010) Development of an elevating manual wheelchair using integrated method. Journal of Advanced Manufacturing Technology, 4 (1). pp. 41-52. ISSN 1985-3157
Hambali A., and Sapuan S.M., (2010) Development of an elevating manual wheelchair using integrated method. Journal of Advanced Manufacturing Technology, 4 (1). pp. 41-52. ISSN 1985-3157
Husaini F.M.H., and Zaki M.N., and Taib I.M. , and Abdullah S., (2010) Utilisation of ultrasonic signals for internal combustion engine condition monitoring using statistical analysis. Journal of Advanced Manufacturing Technology, Vol. 4 (No. 2). pp. 43-48. ISSN 1985-3157
Jeefferie A.R., and Moh Salleh M.A., and Suraya A.R., and Ahmadun F., and Ibrahim N.A., (2010) The effects of lower percentages of filler addition to the mechanical and morphological properties of PP/MWCNTs composites. Journal of Advanced Manufacturing Technology, 4 (1). pp. 1-12. ISSN 1985-3157
Jeefferie, A.R., and Mohd Salleh M.A., and Suraya A.R., and Ahmadun F., and Ibrahim N.A., (2010) The effects of lower percentages of filler addition to the mechanical and morphological properties of PP/MWCNTs composites. Journal of Advanced Manufacturing Technology, 4 (1). pp. 1-12. ISSN 1985-3157
Kamil M.S., and Kamely, A.M., and Saifudin H.Y., and Puvanasvaran, A.P., and Dan M.M.P., (2010) The source of uncertainty in 3D laser scanner. Journal of Advanced Manufacturing Technology, 4 (1). pp. 87-96. ISSN 1985-3157
Kamil M.S., and Kamely, A.M., and Saifudin H.Y., and Puvanasvaran, A.P., and Dan, M.M.P., (2010) The Source of uncertainty in 3D laser scanner. Journal of Advanced Manufacturing Technology, 4 (1). pp. 87-96. ISSN 1985-3157
Mohamed M.A., and Azam M.A., and Kawabuchi, H., and Shikoh, E., and Fujiwara, A., (2010) Characterization of carbon nanotube field-effect transistor fabricated by direct growth method. Journal of Advanced Manufacturing Technology, Vol. 4 (No. 2). pp. 37-42. ISSN 1985-3157
Nor Zaidi H., and Sani Irwan, M.S., (2010) Reduced RRNS Codes for clustered fault-tolerant nanoscale memories. Journal of Advanced Manufacturing Technology, 4 (2). pp. 23-36. ISSN 1985-3157
Saifudin H.Y., and Shukor M.S., and Tajul A.A, and Choong, L.S., and Dan, M.M.P., (2010) Merit-demerit compact disc recycing system. Journal of Advanced Manufacturing Technology, 4 (1). pp. 13-26. ISSN 1985-3157
Saifudin H.Y., and Shukor M.S., and Tajul A.A., (2010) Merit-demerit compact disc recycling system. Journal of Advanced Manufacturing Technology, 4 (1). pp. 13-26. ISSN 1985-3157
Salisa, A.R., and Nong, Z., and Jianguo, Z., (2010) A Comparative study of powertrain configuration for plug-in hybrid electric vehicles. Journal of Advanced Manufacturing Technology, 4 ( 2). pp. 1-14. ISSN 1985-3157
Shukor M.S, and Saifudin H.Y., (2010) Properties determination of self-lubricating algraphite composites. Journal of Advanced Manufacturing Technology, 4 (1). pp. 27-40. ISSN 1985-3157
Shukor M.S., and Saifudin H.Y., (2010) Properties determination of self-lubrication algraphite composites. Journal of Advanced Manufacturing Technology, 4 (1). pp. 27-40. ISSN 1985-3157
Sulaiman S., and Marizan S., and Sy. Najib, Sy.S., and Fahmi M.M., (2010) Vision-based automated guided vehicle for navigation and obstacle avoidance. Journal of Advanced Manufacturing Technology, 4 (2). pp. 71-90. ISSN 1985-3157
Talib A.D., and Roslina A.R., (2010) The study on the characteristics and limitations of pneumatic telescopic for the development of a low-cost and safe pneumatic personal lift. Journal of Advanced Manufacturing Technology, 4 (1). pp. 97-104. ISSN 1985-3157
Talib A.D., and Roslina A.R., (2010) The study on the characteristics and limitations of pneumatic telescopic for the development of a low cost and safe pneumatic personal lift. Journal of Advanced Manufacturing Technology, 4 (1). pp. 97-104. ISSN 1985-3157
Wong, C., and Yap, David, F.W., and Ranjit, S.S.S., and Mazlina N.M., (2010) A novel design of analog defects testing strategies using genetic algorithms. Journal of Advanced Manufacturing Technology, Vol. 4 (No. 2). pp. 15-22. ISSN 1985-3157
Zuki N.M., and Noor M.M., and Kadirgama, K., and Hussain H.C., and Sapuan S.M , (2010) Investigation on different methods of joining for automative panel. Journal of Advanced Manufacturing Technology, 4 (1). pp. 73-86. ISSN 1985-3157
Zuki N.M., and Noor M.M., and Kadirgama, K., and Hussain H.C., and Sapuan S.M., (2010) Investigation on different methods of joining for automotive panel. Journal of Advanced Manufacturing Technology, 4 (1). pp. 73-86. ISSN 1985-3157
2009
Amelia Lily , and Dzuraidah A.W., and Che Hassan C.H., (2009) Development of an Optimisation Model for Automotive Component Reuse. Journal of Advanced Manufacturing Technology, 3 (1). pp. 87-96. ISSN 1985-3157
Azdiana M.Y., and Noor Asyikin S., and Khairuddin, and Zaharudin, . (2009) Vibration Control of a Gantry Crane System Using Inverse Dynamic Analyses. Journal of Advanced Manufacturing Technology, 3 (1). pp. 97-108. ISSN 1985-3157
Mark, B., and Toshihiko, M., and Teruaki, M., and Kazushi, T., (2009) Micro-Hole Punching Using Multi-Point Punch and Die Made by EDM. Journal of Advanced Manufacturing Technology, 3 (1). pp. 73-86. ISSN 1985-3157
Noorhana Y., and George, Z.C., and Graeme, A.S., (2009) Preparation and Physical and Electrical Characteristics of Novel Carbon Nanotube Microelectrodes. Journal of Advanced Manufacturing Technology, 3 (1). pp. 109-122. ISSN 1985-3157
Sammaiah P., and Tagore, G.R.N., and Madhusudhan, G.R, (2009) Effect of Parameters on Mechanical Properties of Ferritic Stainless Steel (430) and 6063 Al-Alloys by Friction Welding. Journal of Advanced Manufacturing Technology, 3 (1). pp. 21-34. ISSN 1985-3157
Sivarao, S., and Kamely, A., and Dan, M.M.P, (2009) Fuzzy Expert System Modeling of Laser Processing. Journal of Advanced Manufacturing Technology, 3 (1). pp. 35-44. ISSN 1985-3157
Wazed M.A., and Ahmed S., and Nukman Y., (2009) Commonality Indices in Design and Production Planning. Journal of Advanced Manufacturing Technology, 3 (1). pp. 1-20. ISSN 1985-3157
Zaihirain M.M.R., and Napsiah I., and Sapuan M.S., and Wong, S.V., (2009) Quick Cost Estimation Model for Early Order Stage. Journal of Advanced Manufacturing Technology, 3 (1). pp. 45-72. ISSN 1985-3157
2008
Effendi M., and Razali M.M., and Rohana A., and Adi S., (2008) A Study on the Development of Key Performance Indicators (KPIS) at an Aerospace Manufacturing Company. Journal of Advanced Manufacturing Technology, Vol. 2 (No. 2). pp. 1-18. ISSN 1985-3157
Faizal M.A., and Shahrin S., and Asrul H.Y., and Fairuz M.I.O., and Robbie, Y., (2008) Feature Selection For Detecting Fast Attack in Network Intrusion Detection. Journal of Advanced Manufacturing Technology, Vol. 2 (No. 2). pp. 39-56. ISSN 1985-3157
Hadzley M.A.B., and Raja Izamshah R.A,, and Jabir M.S., (2008) Wear Performance of Flat End-Mill Cutter During Machining of Copper Based Metal. Journal of Advanced Manufacturing Technology, 2 (1). pp. 11-18. ISSN 1985-3157
Hairol Nizam M.S., and Marizan S., and Syed Najib S.S., (2008) Intelligent Mobile Robot Systems In Indoor Environment Applications. Journal of Advanced Manufacturing Technology, 2 (1). pp. 19-32. ISSN 1985-3157
Hanafiah Y., and Ohka, M., and Yamano, M., and Nasu, Y., (2008) Contact Sensing Approach in Humanoid Robot Navigation. Journal of Advanced Manufacturing Technology, 2 (1). pp. 33-50. ISSN 1985-3157
Herman M.J., and Azmi M.S., and Marizan S., (2008) Motion And Energy Optimization Of Vision Guided Manipulator For Optimal Dynamic Performance. Journal of Advanced Manufacturing Technology, 2 (1). pp. 67-78. ISSN 1985-3157
Imran M.I., and Hasnain A., and Abd. Aziz M, (2008) Design and Development of Carbon Base Microwave Absorber. Journal of Advanced Manufacturing Technology, 2 (2). pp. 77-86. ISSN 1985-3157
Izaidin, A.M., and Sarah, Y.C., and Jonathan, L., and Kamariah, I., and Faisal, A., (2008) Entrepreneurial Management and Technology-Based Firm Performance. Journal of Advanced Manufacturing Technology, 2 (1). pp. 79-98. ISSN 1985-3157
Kamely, M.A., and Noordin M.Y., and Ourdjini, A., and Venkatesh, V,C., and Razali M.M. , (2008) Alternative Low Cost Cutting Tools For Hard Turning of AISI D2. Journal of Advanced Manufacturing Technology, Vol. 2 (No. 2). pp. 29-38. ISSN 1985-3157
Nur Zatul I.I., and Nanna S.H., and Shahrin S., (2008) GIS Based Location Information Enquiry System (GISBALIES) Using SVG Technique in Different Handheld Device OS(s). Journal of Advanced Manufacturing Technology , Vol. 2 (No. 2). pp. 57-64. ISSN 1985-3157
Robiah Y., and Rahayu S.S., and Shahrin S., and Faizal M.A. , (2008) Alert Correlation Technique Analysis for Diverse Log. Journal of Advanced Manufacturing Technology, Vol. 2 (No. 2). pp. 65-76. ISSN 1985-3157
Safiza Suhana K.B., and Sisi, Zlatanova, (2008) Managing Moving Objects Data and Context Data for Emergency Management System. Journal of Advanced Manufacturing Technology, Vol. 2 (No. 1). pp. 51-66. ISSN 1985-3157
Vijayaram, T.R., (2008) Metal Casting Solidification Simulation Technology. Journal of Advanced Manufacturing Technology, 2 (2). pp. 19-28. ISSN 1985-3157
Yuhazri M.Y., and Dan M.M.P., (2008) High Impact Hybrid Composite Material for Ballistic Armor. Journal of Advanced Manufacturing Technology, 2 (1). pp. 1-10. ISSN 1985-3157
2007
Abid Y., and Othman S., and Farid G., and Fadzli M., (2007) Estimation of BIT Error Probability in Uncoded FHSS. Journal of Advanced Manufacturing Technology, Vol. 1 (No. 1). pp. 61-66. ISSN 1985-3157
Haron N.Z., and Aziz A.S.A., and Ibrahim M.M., and Salim S.I.M., (2007) 8-Channel Logic Analyser Controller Design Using Field Programmable Gate Array. Journal of Advanced Manufacturing Technology, Vol. 1 (No. 1). pp. 87-96. ISSN 1985-3157
Jena, R.K., and Sharma, G.K., and Mahanti, P.K., (2007) System-On-Chip Design Space Exploration at System level. Journal of Advanced Manufacturing Technology, 1 (1). pp. 115-127. ISSN 1985-3157
Munlin,M., and Makhanov, S.S., (2007) Angle Optimization Algorithms for Five -Axis Milling Machines. Journal of Advanced Manufacturing Technology, Vol. 1 (No. 1). pp. 1-128. ISSN 1985-3157
Radzai M.S., and Rizal M.A., (2007) THE CRUSHING BEHAVIOUR OF ALUMINIUM FOAMS. Journal of Advanced Manufacturing Technology, Vol. 1 (No. 1). pp. 1-128. ISSN 1985-3157
Somrak, P., and Gareth, M., (2007) Optimisation of Prehension Force Through Tactile Sensing. Journal of Advanced Manufacturing Technology, Vol. 1 (No. 1). pp. 67-85. ISSN 1985-3157
Sulaiman S., and Marizan S., and Najib S.S.S., and Fahmi M.M., (2007) Track and Obstacle Detection with USB Camera for Vision-Based Automated Guided Vehicle. Journal of Advanced manufacturing Technology, Vol. 1 (No. 1). pp. 49-60. ISSN 1985-3157
Tajuddin A.S., and Nanna S.H., (2007) Conceptual Development of Resources Discovery in the Proposed Hybrid P2P Video Streaming. Journal of Advanced Manufacturing Technology, Vol. 1 (No. 1). pp. 97-114. ISSN 1985-3157
Tan, C.J., and Mori, K., and Abe, Y., (2007) Multi-Stage Stamping of High Strength Steel Wheel Disk. Journal of Advanced Manufacturing Technology, Vol. 1 (No. 1). pp. 31-47. ISSN 1985-3157
Yuhazri M.Y., and Dan M.M.P., (2007) Helmet Shell Using Coconut Fibre (Deco-Helmet). Journal of Advanced Manufacturing Technology, Vol. 1 (No. 1). pp. 23-30. ISSN 1985-3157
This list was generated on Wed Jan 23 17:07:53 2013 MYT.
